Windows 9X Boot Sequence Windows 95 Boot Process Overview Windows 95 places a large number of files in the root directory. (These files are listed at the end of this article under the table “Windows 95 root directory files”) Also, the boot sequence we’ll discuss applies only to a normal boot procedure. Windows 95 is an operating system released in 1993 that targeted professional users. With the same desktop GUI as Windows 3.1, Windows NT 3.1 was quickly adopted by the professional community. Below is a list of available Windows 95 boot disk images for download. To Disable GUI Boot for the Selected WindowsA) Check the No GUI Boot box, and go to step 5 below. (see screenshot below step 2) 5. If you have another Windows installed (ex: Windows 8) in a multiboot setup that you would like to set this for as well, then repeat step 3 or 4 above for it as well and go to step 6 afterwards. Nope, Windows 95 booted into DOS first and then launched Windows, just as in the 3.1 days. If you hold down the right key at boot (is it F5? F8?) you can boot into a DOS prompt as before. Then type 'win' to launch Windows.
The information in this article applies to: - Microsoft Windows 95
- Microsoft Windows 95 OEM Service Release 2
IMPORTANT: This article contains information about editing the registry. Before you edit the registry, you should first make a backup copy of the registry files (System.dat and User.dat). Both are hidden files in the Windows folder.
Starting Windows 95 in Safe mode can help you resolve issues that occur when you start Windows 95 normally. These issues include (but are not limited to):
- Setup hangs during the first reboot
- Error messages
- Hanging
- Loss of functionality
Starting Windows 95 in Safe mode bypasses the current real-mode configuration and loads a minimal protected-mode configuration, disabling Windows 95 device drivers and using the standard VGA display adapter.
If the issue does not occur in Safe mode, you may be experiencing a conflict with hardware settings, real-mode configuration issues, incompatibilities with legacy Windows programs or drivers, or registry damage.
For a description of the events that occur when you boot Windows 95 in Safe mode, see the following article in the Microsoft Knowledge Base:
PREPARING TO TROUBLESHOOT IN SAFE MODE
The procedures in the following sections describe steps to troubleshoot configurations in which Safe mode resolves an issue with Windows 95. Many of these troubleshooting steps require changes to system configuration files. These changes are not intended to be permanent; they should be used as techniques for isolating the conflict that resulted in an issue with the normal configuration.
The examples in this article assume that Windows 95 has been installed in the Windows folder on drive C. Adjust the syntax as required by your configuration.
Before you begin making changes, you should create an Emergency Boot Disk (EBD) if you do not already have one. You can use the EBD to restart the computer and edit the configuration files if any changes you make cause the computer to hang.
To create an Emergency Boot Disk, follow these steps:
- In Control Panel, double-click Add/Remove Programs.
- Click the Startup Disk tab, and then click Create Disk.
Once you have an EBD, shut down Windows 95, insert the EBD in drive A, and restart the computer. Make sure the computer can boot using the EBD. Restart the computer normally.
Troubleshooting the Windows 95 configuration files may require that the files be edited. You can use the MS-DOS text editor or System Configuration Editor to edit these files.
To use the MS-DOS text editor, type 'edit.com' (without quotation marks) at a command prompt, and then choose the Open command on the File menu to open the file you want.
To use System Configuration Editor, click the Start button, click Run, type 'sysedit' (without quotation marks) in the Open box, and then click OK. Click the file you want to edit on the Window menu.
TROUBLESHOOTING
The Safe-mode troubleshooting steps are broken into the following sections:
- Issues with the real-mode configuration
- Windows 95 command-line switches
- Windows configuration files and programs started automatically at startup
- Protected-mode device drivers
- Changing the video driver to the standard VGA display driver
- Registry damage
- If the problem persists
ISSUES WITH THE REAL-MODE CONFIGURATION
Windows 95 bypasses the Config.sys and Autoexec.bat files in Safe mode. A real-mode device driver or terminate-and-stay-resident program (TSR) loading in one of these files may conflict with Windows 95, leading to the issues you are experiencing during a normal boot. The following steps can help you determine if this is the case.
Test the Real-Mode Configuration
- Restart the computer. When you see the 'Starting Windows 95' message, press the F8 key, and then choose Command Prompt Only from the Startup NOTE: If the Windows 95 graphical user interface (GUI) loads, edit the Autoexec.bat file and remove or disable the 'win' line.
- Start Windows 95 with a minimal set of Windows drivers by typing the following line: NOTE: If networking components are required to start Windows 95, type the following line instead of the line above:
If the issue does not occur when you start Windows 95 in this manner, you have determined that the real-mode and protected-mode configuration conflict. Robin hood the legend of sherwood download free.
If the issue persists, the contents of the Config.sys or Autoexec.bat file may be at fault. You have determined that a conflict exists with the real-mode configuration, and you should perform a clean boot of the real- mode configuration.
Clean Real-Mode Boot
Windows 95 does not require a Config.sys or Autoexec.bat file. These files are necessary only for backward compatibility. If you do not need these files, rename them and restart your computer. For example, rename the Autoexec.bat file to Autoexec.bak, and rename the Config.sys file to Config.bak.
If the Config.sys and Autoexec.bat files are required, perform a clean boot of the real-mode configuration with the required drivers. To do so, follow these steps:
- Restart your computer. When you see the 'Starting Windows 95' message, press the F8 key, and then choose Step-By-Step Confirmation from the Startup menu.
- Load the following items when prompted:
If the clean boot of your real-mode configuration eliminates the issue, isolate the conflict with a TSR or real-mode device driver using the step- by-step confirmation function.
WINDOWS 95 COMMAND-LINE SWITCHES
Starting Windows 95 with command line switches is an effective method for isolating issues with your configuration. The switches should be used for troubleshooting only; use the information to modify your existing configuration and eliminate the conflict.
- Follow the instructions for a clean real-mode boot in the 'Clean Real- Mode Boot' section above, but do not load the Windows GUI.
- Start Windows 95 using the troubleshooting command-line switches by typing the following line:
Description of Command-Line Switches
/D - Used for troubleshooting when Windows 95 does not start correctly.
NOTE: Each of the System.ini file entries referenced above belongs in the [386Enh] section of the System.ini file.
WINDOWS CONFIGURATION FILES AND PROGRAMS STARTED AUTOMATICALLY
Windows 95 includes several methods for loading programs automatically. Starting in Safe mode prevents any programs from being started automatically.
Windows 95 includes a Win.ini and System.ini file for backward compatibility with legacy programs and device drivers. Upgrading a previous installation of Windows 3.x to Windows 95, as well as adding software, can lead to conflicts within the Windows configuration files.
Determine If Issue Is Related to Program Starting at Startup
Load Windows 95 by booting to a command prompt and starting Windows 95 by typing 'win' (without quotation marks), holding down the SHIFT key for the duration of the boot. This prevents any programs from loading automatically at startup.
If the issue is resolved by preventing programs from loading at startup, investigate the following possible sources:
The Winstart.bat File
The Winstart.bat file is used to load TSRs that are required for Windows- based programs and are not needed in MS-DOS sessions.
For more information concerning the Winstart.bat file, see the following article in the Microsoft Knowledge Base:
The Win.ini File
The 'load=' and 'run=' lines in the [Windows] section of the file can start programs automatically. See the following section for more information.
The Startup Group
If the issue is resolved by bypassing the Startup group, remove each of the programs from the Startup group individually to isolate the problem program.
The Run Key in the Registry
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows 95. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
NOTE: For information about how to edit the registry, view the Changing Keys And Values online Help topic in Registry Editor (Regedit.exe). Note that you should make a backup copy of the registry files (System.dat and User.dat) before you edit the registry.
You can prevent programs from loading by removing the program's string from the following registry key:
Programs may also being loading from the following registry key:
Test Windows Configuration Files
To test the Windows configuration files, follow these steps:
- Boot to a command prompt.
- Rename the Win.ini file by typing the following line: Start Windows 95 by typing 'win' (without quotation marks). If this procedure corrects the problem, ensure that the 'load=' and 'run=' lines in the [Windows] section of the Win.ini file are either blank or preceded with a semicolon (;) to prevent the items from loading.
- Rename the System.ini file by typing the following line:
- Windows 95 requires a System.ini file to load the graphical user interface (GUI). Replace the original file by typing the following line: NOTE: Starting Windows 95 with the System.cb file does not load a driver for the mouse. Edit the new System.ini file, adding the following lines:Start Windows 95 by typing 'win' (without quotation marks) at the command prompt. If replacing the original System.ini file with the System.cb file corrects the issue, the problem most likely resides with either the [boot] or [386Enh] sections of the original System.ini. Restore the original file to troubleshoot it.To isolate the cause of the problem, place a semicolon (;) at the beginning of a line to prevent the item from loading.
For more information about the System.ini file and its default entries, see the following article in the Microsoft Knowledge Base:
PROTECTED-MODE DEVICE DRIVERS
Safe mode disables all protected-mode device drivers for Windows 95. Testing for incompatible components and resource conflicts can be conducted by disabling the protected-mode device drivers in Device Manager.
Removing Protected-Mode Device Drivers to Isolate Conflicts
- In Control Panel, double-click System.
- Click the Device Manager tab, and click the View Devices By Type option.
- Disable each of the protected-mode device drivers. For example: a. Double-click the Floppy Disk Controllers branch to expand it.b. Click Standard Floppy Disk Controller, and then click Properties.c. On the General tab, click the Original Configuration (Current)d. Repeat steps A-C for each device in Device Manager.
- Click Close, and then restart the computer.
If the issue is resolved by disabling the protected-mode drivers in Device Manager, you may have a hardware conflict or a driver may be incompatible with your hardware. For more information about troubleshooting resource conflicts in Windows 95, see the following article in the Microsoft Knowledge Base:
If you determine that a Windows 95 protected-mode device driver is incompatible with your hardware, contact the hardware vendor to determine the availability of new drivers.
CHANGING THE VIDEO DRIVER TO STANDARD VGA DISPLAY DRIVER
NOTE: If you followed the directions in the previous section ('Removing Protected-Mode Drivers to Isolate Conflicts'), you changed the display driver to VGA, and you can skip to the next section. Disabling the display adapter sets your video to the VGA driver.
Safe mode starts Windows 95 with the VGA display driver. To determine if the issue you are experiencing is related to your video driver, change to the VGA driver for testing purposes.
NOTE: To ensure a safe return to your previous configuration:
- Back up the System.ini file.
- Note the current desktop area (resolution) and color palette.
- Record the name of your current video adapter.
To change to the VGA display driver, follow these steps:
- Start Windows 95 in Safe mode.
- In Control Panel, double-click Display.
- On the Settings tab, click Change Display Type.
- In the Adapter Type area, click Change.
- Click the Show All Devices option.
- In the Manufacturers box, click (Standard Display Types). In the Models box, click Standard Display Adapter (VGA), and then click OK.
- Click OK or Close until you return to Control Panel. When you are prompted to restart your computer, do so.
If you determine that your video driver is incompatible with Windows 95, contact the hardware vendor to determine the availability of new drivers.
REGISTRY DAMAGE
When you start Windows 95 in Safe mode the registry is read minimally. Damage to the registry may not be evident when running in Safe mode; it may be necessary to replace the existing registry (System.dat) with a backup to determine if the issue is caused by a damaged registry. To troubleshoot a damaged registry, follow these steps:
- Boot to a command prompt.
- Type the following line to remove the file attributes from the backup of the registry:
- Remove the file attributes from the current registry by typing:
- Rename the registry by typing:
- Copy the backup file to the current registry by typing:
- Restart your computer. NOTE: The System.1st file is a backup of the registry created during the final stage of Windows 95 Setup. Therefore, the 'Running Windows 95 for the first time' banner is displayed and Windows 95 finalizes settings as if it were being installed.
Taurus 85 trigger job. If replacing the System.dat file with the System.1st file resolves the issue, the problem may be related to registry damage. Programs and device drivers added after Windows 95 was installed may require reinstallation to update the new registry.
If the issue is not resolved, restore the original registry. To do so, follow these steps:
- Restart the computer to a command prompt.
- Type the following lines:
- Restart the computer.
The Windows 95 CD-ROM includes tools for backing up your system files as well as the registry. For more information about these tools, see the following articles in the Microsoft Knowledge Base:
IF THE PROBLEM PERSISTS
If the troubleshooting steps outlined in this article do not resolve the issue, the issue may be related to one or more of the following items:
- Faulty hardware
- The computer requires a special machine switch for HIMEM.SYS
- CMOS settings may need to be changed (such as disabling shadow RAM)
- The system ROM BIOS may require an upgrade to be compatible with Windows 95
- A virus
- An unsuccessful upgrade of a previous Windows installation
To determine if Windows 95 is compatible with your current system configuration it may be necessary to install Windows 95 to a clean directory.
If you have enough free disk space, install Windows 95 to an empty folder (such as a Win95 folder). For information about how to do so, see the following article in the Microsoft Knowledge Base:
If this resolves the issue, your previous installation may have included components incompatible with Windows 95.
EasyBoot is an easy-to-use utility to create custom multi-boot, menu driven CDs and DVDs. It has the ability to automatically produce boot image files, and generate the ISO file as well. Using your CD-R/W Recording software such as Nero or Roxio to Record the ISO, you get a bootable CD that completely belongs to you. You can customize it with your companies name or slogan or even use it for your clients.
EasyBoot runs on Windows 95/98/Me/NT/2000/XP.
EasyBoot can:
1. Realize local language, multiple selections, and colorful menus.
2. Create screen layouts, Insert text, menu bars and function keys with a full GUI
3. Preview the actual effects during the design process.
4. Automatically generate boot loader and menu files.
5. Directly build bootable ISO files that are ready to burn.
Additional details:
1. Full Graphical User Interface, it is easy to learn for everyone.
2. Only adds one additional file to the root directory of your CD, does not destroy the original native style.
3. Supports up to 36 menu items.
4. Supports Up, Down, Left, Right and Tab keys to select menus, Enter and Spacebar keys to boot.
5. Supports User-Defined accelerated keys (such as 0-9, a-z) to directly select menu item.
6. Supports User-Defined function keys (such as Esc, F1-F12) to directly boot selected option.
7. You can choose Run Directly or Select for the execution mode of the accelerated keys.
8. You can choose translate all input key to small letter or capital letter.
9. Supports User-Defined cursor key movement, so you can freely layout the screen menu.
10. Supports Sub-menus to create extremely complex boot CD's.
11, supports startup logo
12, supports background image
13, supports time counter
14, supports password pretection to bootable CD
15. Convenient but powerful edit functions
16. Built in ISO image generation feature, with advanced feature such as Optimize and Set Date/Time.
EasyBoot runs on Windows 95/98/Me/NT/2000/XP.
EasyBoot can:
1. Realize local language, multiple selections, and colorful menus.
2. Create screen layouts, Insert text, menu bars and function keys with a full GUI
3. Preview the actual effects during the design process.
4. Automatically generate boot loader and menu files.
5. Directly build bootable ISO files that are ready to burn.
Additional details:
1. Full Graphical User Interface, it is easy to learn for everyone.
2. Only adds one additional file to the root directory of your CD, does not destroy the original native style.
3. Supports up to 36 menu items.
4. Supports Up, Down, Left, Right and Tab keys to select menus, Enter and Spacebar keys to boot.
5. Supports User-Defined accelerated keys (such as 0-9, a-z) to directly select menu item.
6. Supports User-Defined function keys (such as Esc, F1-F12) to directly boot selected option.
7. You can choose Run Directly or Select for the execution mode of the accelerated keys.
8. You can choose translate all input key to small letter or capital letter.
9. Supports User-Defined cursor key movement, so you can freely layout the screen menu.
10. Supports Sub-menus to create extremely complex boot CD's.
11, supports startup logo
12, supports background image
13, supports time counter
14, supports password pretection to bootable CD
15. Convenient but powerful edit functions
16. Built in ISO image generation feature, with advanced feature such as Optimize and Set Date/Time.
Features
- EasyBoot Free & Safe Download!
- EasyBoot Latest Version!
- Works with All Windows versions
- Users choice!
EasyBoot is a product developed by Ezb Systems, Inc. This site is not directly affiliated with Ezb Systems, Inc. All trademarks, registered trademarks, product names and company names or logos mentioned herein are the property of their respective owners.
All informations about programs or games on this website have been found in open sources on the Internet. All programs and games not hosted on our site. When visitor click 'Download now' button files will downloading directly from official sources(owners sites). QP Download is strongly against the piracy, we do not support any manifestation of piracy. If you think that app/game you own the copyrights is listed on our website and you want to remove it, please contact us. We are DMCA-compliant and gladly to work with you. Please find the DMCA / Removal Request below.
DMCA / REMOVAL REQUEST
Please include the following information in your claim request:
- Identification of the copyrighted work that you claim has been infringed;
- An exact description of where the material about which you complain is located within the QPDownload.com;
- Your full address, phone number, and email address;
- A statement by you that you have a good-faith belief that the disputed use is not authorized by the copyright owner, its agent, or the law;
- A statement by you, made under penalty of perjury, that the above information in your notice is accurate and that you are the owner of the copyright interest involved or are authorized to act on behalf of that owner;
- Your electronic or physical signature.
Boot Windows 95 In Guitar
You may send an email to support [at] qpdownload.com for all DMCA / Removal Requests.
You can find a lot of useful information about the different software on our QP Download Blog page.
Latest Posts:
How do I uninstall EasyBoot in Windows Vista / Windows 7 / Windows 8?
- Click 'Start'
- Click on 'Control Panel'
- Under Programs click the Uninstall a Program link.
- Select 'EasyBoot' and right click, then select Uninstall/Change.
- Click 'Yes' to confirm the uninstallation.
Boot Windows 95 In Guide
How do I uninstall EasyBoot in Windows XP?
- Click 'Start'
- Click on 'Control Panel'
- Click the Add or Remove Programs icon.
- Click on 'EasyBoot', then click 'Remove/Uninstall.'
- Click 'Yes' to confirm the uninstallation.
Windows 7 Gui
How do I uninstall EasyBoot in Windows 95, 98, Me, NT, 2000?
- Click 'Start'
- Click on 'Control Panel'
- Double-click the 'Add/Remove Programs' icon.
- Select 'EasyBoot' and right click, then select Uninstall/Change.
- Click 'Yes' to confirm the uninstallation.
Windows Gui History
![Guitar Guitar](https://i.pinimg.com/originals/ac/03/5d/ac035d594b0b21e1a5560992115ff602.png)
- How much does it cost to download EasyBoot?
- How do I access the free EasyBoot download for PC?
- Will this EasyBoot download work on Windows?
Nothing! Download EasyBoot from official sites for free using QPDownload.com. Additional information about license you can found on owners sites.
It's easy! Just click the free EasyBoot download button at the top left of the page. Clicking this link will start the installer to download EasyBoot free for Windows.
Yes! The free EasyBoot download for PC works on most current Windows operating systems.